Divas Homelift

100% Made in Italy, suitable for any type of architectural context. It is distinguished by its silence, reliability, safety and ease of installation.

Available both with Hydraulic and MRL electric technology.

Divas is a safe elevator, in case of interruption of the mains supply, the machine automatically returns to the lowest floor.
It can be installed in new buildings or existing buildings, we may also provide a metal structure for interior or exterior.
Divas is a certified product, fully customizable in coatings and optional.

100% Italian Design

Divas is an italian product, shipped worldwide: its design follows the highest quality standards​

EU Certificate

Divas is fully produced in Italy, for this reason it must follow the European Standards and most important 2006/42/CE

Accesibility

Divas is the perfect product for anyone that needs to improve the accessibility of their own Home

Easy to install

Divas is a quick and easy product. It takes less then a week to be Installed.

150 MM pit

Divas needs only 150mm for the Pit. Making it easly adaptable to any project.

MRL DIVAS LIFT

MRL TECHNOLOGY

  • Oil Free
  • Brushless motor to provide a quiet ride
  • No Maintenance motor
  • Saves more energy then Hydraulic
  • Performance does not vary with in extreme temperatures

Divas datasheet and features

Traction  – Gearless motor
Capacity – From 250kg to 400kg
Maneuver – Maneuver APB or automatic in the cabin and automatic on the floor
Stops – Up to 7
Travel –  Max 25000mm
Minimum headroom – 2450 mm with manual doors, 2600mm with automatic doors
Minimum pit – 160mm (with linoleum floor) or 180mm (with marble ones)
Speed –  0,15 m/s  (on request 30 m/s – slow lift)
Doors – Automatic or swing
Power supply – 220V one-phase / three-phase
Motor power – From 0,6 to 1,2 k
Norms – EN 81.41 , 2006/42/CE

Traction  – Hydraulic with control unit installed near the shaft, or in a cabinet
Capacity – From 250kg to 650kg
Maneuver – Maneuver APB or automatic in the cabin and automatic on the floor
Stops – Up to 6
Travel –  Max 15000mm
Minimum headroom – 2400 mm with manual doors, 2600mm with automatic doors
Minimum pit – 150mm (with linoleum floor) or 180mm (with marble ones)
Speed –  0,15 m/s  (on request 30 m/s – slow lift)
Doors – Automatic or swing
Power supply – 220V one-phase / three-phase
Motor power – From 1.5 to 4 kw
Norms – EN 81.41 , 2006/42/CE

Entrances: 1 or 2 opposite or adjacent accesses
Car operating panel COP:  mechanical side removable column with braille push buttons, open door, alarm maintenance key, LCD display, and emergency light/capacity plate
Landing doors:  hinged with a standard window or automatic with central or side opening.
Floor buttons: flush-mounted steel plate complete with braille push buttons, open door, alarm and / or display for floor indication
Cabin:  walls in plasticized sheet steel with stainless steel finishes, linoleum floor, white 4 LED spotlights ceiling, half-wall mirror with handrail, roof with hatch and photocell barrier.
Cabin doors:  on the automatic platform, finishes are like cabin walls
Hinged doors: blinded,panoramic with transparent glass or custom. Ral paintings or steel coating Fire-fighting version el60- el120
Landing operating panel LOP: enabling calls key, TFT display, floor indicators(out of service, direction arrows, alarm , arriving indicator)
Automatic landing doors: 2AT (Two telescopic), 3AT (3 telescopic leaves), 2AO (two opposite central antis), 4AO (four opposite central doors), blind or panoramic. Ral painting, plasticized sheet or steel. Fire fighting version EL60-EL120
Car operating panel COP: enabling calls key, independent call key, cabin fan switch, cabin light switch, TFT display with customization of the capacity plate with customer logo, loudspeaker cut out, for synthesis
Cabin doors: in plasticized sheet, steel or panoramic.
Cabin: full-wall mirror, bidirectional communication device, panoramic walls, special steel finishes. Ceiling with different finishes, vocal synthesis, protection bumper strips. Predisposition for bottom coating.
Supporting structure: pres-folded sheet metal for exteriors and interiors with bolted elements. Finishes with RAL painting. Buffering with laminated glass or insulated panels and / or sheets

Discover other Elevators solution

We are ready to help you,
Contact us!