Marlin 7"

7" cabin TFT display with customizable graphics: voice announcements, CanBus or multi-parallel connection and calls included on the NET version. WIFI version available for remote programming.

TFT
Display
CAN bus
Voice announcer
Made in Italy

TFT display: 7″
Resolution: 800×480
Voice languages: 9
Managed floors: 41

Overview

Visual and audible floor indicator for cabin and landing: shows position, travel direction, alarms and service states, with programmable graphics and voice.

Marlin is Movilift's 7-inch cabin TFT display, designed and assembled in-house in Italy. It shows floor number, travel direction and service messages in fully brandable 800×480 graphics — custom backgrounds, fonts, per-floor images and your company logo — prepared with the Atlantis software and loaded over WiFi or SD card.

It mounts horizontally or vertically and connects to Movilift controllers over a single serial CAN bus, or in multi-parallel (Binary, Negative Binary, BCD, Gray, 7-segment) with any controller. It manages –9 to 31 floors, speaks 9 languages through its voice announcer and can play background music; in stand-alone mode, with magnetic sensors, it runs without a controller.

Two versions: Marlin EVO, without calls, and Marlin NET, with 12 cabin calls included. The WIFI version is programmed remotely.

Specifications

Screen size	7″ (also 10″)
Resolution	800 × 480 px
Orientation	Horizontal / Vertical (programmable)
Power supply	12–24 VDC ±10%
Current	250 mA typ. / 800 mA max
Interface	Serial CAN (Movilift) + multi-parallel
Managed floors	−9 to 31 (41 total)
Audio	9-language voice announcer + multi-tone gong; MP3 background
Memory	micro SD 4 GB FAT32
Loudspeaker	4–8 Ω, 1–5 W
Programming	onboard buttons / microSD / Atlantis EVO
Operating temp	−15 °C to +50 °C
Firmware	update via microSD
Usage	Cabin
Versions	EVO (no calls) · NET (12 calls) · WIFI
Cut-out	157.75 × 89.45 mm

Variants & differences

Variant	Cabinet	Dimensions	Notes
Marlin EVO 7″	–	cut-out 89.45 × 157.75 mm	–
Marlin EVO 10″	–	cut-out 129.10 × 226.65 mm	–

Options

PN: Parallel
SOUND: AUDIO

Compatibility

Movilift motherboards via proprietary serial CAN bus (display is powered by the board — no separate supply in serial mode).
Multi-parallel with any controller: 1-wire-per-floor, Binary, Negative Binary, BCD, Gray, 7-segment. Configured with the Atlantis online editor
Standalone mode with N.O. magnetic sensors (no controller required).
Part of the Marlin family: SOUND, EVO-PN, NET, EL.