Control boards

32-bit lift control mainboard for machine-room and MRL elevators — EN 81-20/50 compliant, with integrated battery charger, UCM monitoring and RS232/USB programming.

The most technological and flexible mainboard: customizable inputs and functions, built-in encoder connection for the digital shaft, Bluetooth and Wi-Fi for remote control and app. Ideal for high speeds, up to 4 m/s, and irregular interfloors.

32-bit lift control mainboard — up to 32 stops over serial CAN, EN 81-20/50 certified, with shaft-reading options, USB firmware update and MoviControl remote monitoring.

The most compact mainboard: up to 32 stops in serial and 8 in parallel, expandable with CHM boards and EN 81-20/50 certified. Ideal for modernizations, with protected display connections.

Multiplex board that links up to eight lifts, duplex to octuplex, up to 32 stops, handling different floors served and wiring landing calls and displays in serial.

Serial call-expansion board for the controller, adding cabin calls or landing inputs/outputs on the Movilift CANbus.

Compact serial landing interface board for landing calls and info, available as CHM2S and CHM2S-Multi.

Cabin expansion board: up to 12 floors, or 32 by adding COP_chm boards, services included. Ideal for modernizations, it reduces the connections between controller and cabin.

Cabin expansion board: up to 12 floors, or 32 by adding COP_chm (services not included). Mounted on the car operating panel, it reduces the connections between controller and cabin.

Electronic door-operator board that drives a DC brush motor with two speed profiles — encoder, limits or timing control, on-board setup and Movilift serial CAN.

Serial car-top control board that drives door operators, sensors, lighting, photocells and the auto-dialer over CANbus.

Drives door operators with three-phase induction motor and encoder; ideal for modernizations, its multi-speed control improves operation.

Display decoder board converting binary or CANbus signals to 1-wire-per-floor, 7-segment, binary or Gray display coding.

Door operator board for PM motors: drives three-phase permanent-magnet motors with encoder control. Ideal for modernizations.

Connection board between controller and cabin for homelifts.

CanBus serial circuit protection filter for the landings: protects and branches the Movilift serial line to landing devices.

Absolute shaft positioning system reading a magnetic tape with an ELGO sensor to manage speeds and deceleration.

RS485 to CanBus signal conversion board.

Controller board that handles the commands and functions required by the European standard EN 81-20.

Program NZEN and use its 6 inputs and 4 outputs to suit your needs.

Protection board for controllers, with two rectifiers and fuses.

24 Vdc stabilized protection board, with rectifier and fuse.

Controller protection board, with three rectifiers, fuses and two relays.

Board that manages the operation of a thermistor, with a reset button.

Interface board converting parallel coding to serial CANbus for landing and cabin display indicators.

Full-Duplex transmission and reception board for CanBus signals.

Drives door operators with three-phase induction motor, by limits or timed; ideal for modernizations, it generates multi-speeds that improve operation.