BR50
BR50 mainboard: up to 32 stops in serial and 8 in parallel, expandable with CHM boards, EN 81-20/50. Ideal for modernizations.
- Mainboard
- 32-bit
- EN 81-20
- CANopen
- Movicontrol
- Made in Italy
- Max floors
- 32
- Certified
- EN 81-20/50
- Manoeuvre types
- 13
- Stored faults
- 100
Overview
The main board that runs a Movilift elevator controller — manages calls, positioning, doors, the safety chain and manoeuvre logic for up to 32 stops.
The BR50 is Movilift's compact 32-bit control mainboard for small and mid passenger lifts, engineered and produced in-house in Italy. Despite its size it runs the complete manoeuvre — calls, positioning, doors, the safety chain and drive control — for up to 32 stops over a serial CAN bus, with the full Movilift manoeuvre set from simplex collective to duplex/triplex/quadruplex dispatch, plus firefighters, hospital and Shabbat modes.
Certified to EN 81-20:2020 and EN 81-50:2020, it integrates a 12 V battery charger, a 1.5 A stabilized supply and safety-chain monitoring, reads the shaft by magnetic switches, digital encoder or absolute magnetic tape, and stores the last 100 diagnostic events. It offers 15 settable I/O and up to 2 door operators, is programmed from the removable on-board keypad or an RS232 PC tool, updated over USB, and can be monitored remotely through the MoviControl WebApp over GSM.
Specifications
| Dimensions | 124 × 235 mm |
|---|---|
| Weight | 320 g |
| Processor | 32-bit MCU (embedded firmware) |
| Supply voltage | 12–24 VDC/AC ±10% |
| Stabilized output | 12 VDC, 1500 mA |
| Battery charger | 13.8 VDC, 400 mA |
| Safety-chain input | 24–220 VAC/DC |
| Transistor output | 250 mA |
| Wired stops | 16 universal / 8 down collective / 5 full collective |
| Max stops (CAN) | 32 full collective / 24 down collective |
| Settable I/O | 15 |
| Door operators | Up to 2 |
| CAN protocol | Movilift proprietary, DS301 CANopen |
| Shaft reading | Magnetic switches, digital encoder or absolute magnetic tape |
| Programming | Removable on-board keypad; RS232 PC tool (9600 8N1) |
| Firmware update | USB |
| Remote control | MoviControl WebApp (GSM) |
| Stored faults | 100 |
| Compliance | EN 81-20:2020 / EN 81-50:2020 |
| Operating temperature | 0 °C to +50 °C |
| Max stops | 32 serial / 8 parallel |
Compatibility
Entry mainboard for the Movilift controller range, in the same BR family as the BR100, BR200 and BR400. Wired capacity of 16 (universal) / 8 (down collective) / 5 (full collective) stops, extended to 32 stops in full collective over the proprietary serial CAN bus (DS301 CANopen) with COP/LOP boards. Connects to Movilift displays (Marlin family) and pushbuttons over CAN, drives VVVF inverters, and supports up to 2 door operators, 16 floors with selective access and 15 settable I/O. Remote monitoring via the MoviControl WebApp (GSM).
- MoviLift serial (CAN)
- EN 81-20/50
- VVVF drive
Works with
BR10032-bit lift control mainboard — up to 32 stops over serial CAN, EN 81-20/50, USB firmware update and MoviControl remote monitoring.
BR20032-bit lift control mainboard for machine-room and MRL elevators — EN 81-20/50, built-in battery charger, UCM monitoring, RS232/USB programming.
Marlin 7"Marlin 7" cabin TFT display with custom graphics, voice announcements, CanBus or multi-parallel, calls included on the NET version. WIFI version available.
RomaEN 81-70 accessible lift pushbutton with Braille and raised symbols, lit by 4 SuperLEDs — polycarbonate body, chromed or gold ring, in red, white or blue.
Software & updates
- USB
- Onboard keypad
- RS232
- MOVICONTROL