BR400
The most flexible mainboard: customizable inputs and functions, built-in encoder input, Bluetooth and Wi-Fi. Ideal for speeds up to 4 m/s.
- Mainboard
- 32-bit
- EN 81-20
- CANopen
- Movicontrol
- Made in Italy
- Max floors
- 32
- Certified
- EN 81-20/50
- Manoeuvre types
- 13
- Max speed
- 4 m/s
Overview
The main board that runs a Movilift elevator controller — manages calls, positioning, doors, the safety chain and manoeuvre logic for up to 32 stops.
The BR400 is Movilift's top-of-range 32-bit control mainboard for machine-room and MRL passenger lifts, engineered and produced in-house in Italy. It runs the complete manoeuvre — calls, positioning, doors, the safety chain and drive control — for up to 32 stops over a serial CAN bus, with a rich set of manoeuvre types from simplex collective to duplex/triplex/quadruplex dispatch, plus firefighters, hospital and Shabbat modes.
Certified to EN 81-20:2020 and EN 81-50:2020, it integrates a 12 V battery charger, a 2 A stabilized supply and safety-chain monitoring, reads the shaft by magnetic switches, digital encoder or absolute magnetic tape, and stores the last 100 diagnostic events. It is programmed from the on-board keypad or an RS232 PC tool, updated over USB, and can be monitored remotely through the Movicontrol WebApp over GSM.
Specifications
| Dimensions | 90 × 250 mm |
|---|---|
| Weight | 280 g |
| Processor | 32-bit MCU (embedded firmware) |
| Supply voltage | 14–24 VDC ±10% |
| Stabilized output | 12 VDC, 2000 mA |
| Battery charger | 13.8 VDC, 400 mA |
| Safety-chain input | 24–110 VAC/DC |
| I/O | 23 inputs (IN0–IN22) / 14 outputs (O0–O13), mappable |
| Max stops | 32 full collective / 24 down collective (serial CAN) |
| CAN protocol | Movilift proprietary, DS301 CANopen |
| Shaft reading | Magnetic switches, digital encoder or absolute magnetic tape |
| Programming | On-board keypad; RS232 PC tool (9600 8N1) |
| Firmware update | USB |
| Remote control | Movicontrol WebApp (GSM) |
| Stored faults | 100 |
| Compliance | EN 81-20:2020 / EN 81-50:2020 |
| Operating temperature | 0 °C to +50 °C |
| Max speed | 4 m/s |
| Connectivity | Wi-Fi and Bluetooth — BR-Next app, Elevator Status |
| Encoder | Built-in connection, Limax absolute positioning |
Compatibility
Mainboard for the Movilift controller range, in the same BR family as the BR200. Manages up to 32 stops in full collective over the proprietary serial CAN bus (DS301 CANopen), expandable with COP/LOP boards, or up to 24 via CHM wiring expansion. Connects to Movilift displays (Marlin family) and pushbuttons (Roma) over CAN, drives VVVF inverters, and supports up to 3 door operators and 16 floors with selective access. Remote monitoring via the Movicontrol WebApp (GSM).
- MoviLift serial (CAN)
- EN 81-20/50
- VVVF drive
Works with
BR20032-bit lift control mainboard for machine-room and MRL elevators — EN 81-20/50, built-in battery charger, UCM monitoring, RS232/USB programming.
Marlin 7"Marlin 7" cabin TFT display with custom graphics, voice announcements, CanBus or multi-parallel, calls included on the NET version. WIFI version available.
RomaEN 81-70 accessible lift pushbutton with Braille and raised symbols, lit by 4 SuperLEDs — polycarbonate body, chromed or gold ring, in red, white or blue.
Gearless VVVF ControllerComplete gearless traction controller with VVVF drive, built around the BR mainboard — with or without machine room, optional ARD emergency return.
Software & updates
- USB
- Onboard keypad
- RS232
- MOVICONTROL